Tip & Tricks: Battery Reset on Sennheiser DW Series Headsets (v1.0)
Resetting the Battery
- The headset should be in a charging position. On the base station there is a small recessed button. Press and hold this button for 1 second.
(On the DW series it is located to the right of the six white DIP switches)
NOTE: The headset should be in the charging position on the base station when the recessed reset button is pressed.
- After the recessed reset button has been pressed the LED battery indicator lights will begin flashing indicating the boost charge process has begun.
- Leave the headset charging on the base station for a minimum of 30 minutes.
General Battery Care
- charge/recharge the device (battery) as often as possible (avoid low charge states).
- if not in use, always place the headset on the base station.
- make sure that the device (battery) is kept within the optimal temperature range; when not in use, keep under cool conditions and avoid large variations in temperature.
- if the headset is not going to be used for an extended period, such as annual leave, turn off the headset and store it next to the base station (i.e. not connected to it).
Found a problem with this article? Please email helpdesk@purpleuc.com and let us know.